[TRNSYS-users] Number format when using parametric table in TRNEdit

Nordine Belaissaoui via TRNSYS-users trnsys-users at lists.onebuilding.org
Mon May 30 12:49:14 PDT 2016


Hi,
In your example you're talking of 201 and 210. Those are 2 different
logical units.
Can you first make sure of your example in your email. It may just be a
misunderstanding in your email.

Then, I think your issue is caused by an other logical unit in the same
file.
You must make sure that there is no other 201 (210) logical unit used in
that .dck.
I personally started my own logical unit from 39000 and it works fine.



On Monday, 30 May 2016, Christian Herløv Krintel <
trnsys-users at lists.onebuilding.org> wrote:

> Dear all,
> I have a parametric table with a list of logical units, which I use to
> choose different weather files for my simulation.
> Some of the runs are omitted due to errors. It seems that these errors are
> caused by the number formatting.
>
> For instance when opening the first .dck file, e.g. TEST1.dck, it says
> something like
>
> ASSIGN "Weather\file.tm2" 2.0100E+02
>
> Even though I just put "210" in the parametric table. The error disappears
> when I change the number into "210" and run the .dck file again.
> How can I circumvent this propblem?
>
> Thank you
> Best regards
> Christian Krintel
> Technical University of Denmark
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>


-- 
Nordine Belaissaoui
--
DualSun - Product Manager, M.Sc Energy Engineering
Phone : +33 4 13 41 53 71
Email : nordine.belaissaoui at dualsun.fr
Address : Pôle de l'Etoile - 38 rue Frédéric Joliot Curie - F 13451
Marseille Cedex 13
www.dualsun.fr | Page Facebook | Fil Twitter | Profil LinkedIn | Page
Google+
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160530/b81bcf9c/attachment.htm>


More information about the TRNSYS-users mailing list