[TRNSYS-users] Editing TRNSYS 3D buildings

[Brian Raichle]

Thanks for your reply, Jacob. I have a few followup questions.

I was hoping there's a way to reimport a modified idf into an existing Sim
Studio model. The "New 3D Project Wizard" doesn't allow this - that I've
seen.

In TRNBuild I don't see the "File/Import TRNSYS3D file" option, unless I
have a blank TRNBuild - not already linked to a B17 file. So I'm not able
to import a modified idf???

The tutorial makes sense to import a modified idf into a new Sim Studio or
new TRNBuild. Is there a way to reimport into an existing model?

Also (last question) - you hinted that there's a "new" TRNSYS3D way. Also,
the tutorial hasn't referred to the *bldname*_b17.idf file that's created
during import into Sim Studio. Is this now obsolete? I've never understood
how this file could get updated. Can I only worry about the idf and b17
files?

OK - one last question. A screenshot in the tutorial shows a .b18
extension. I'm using 17. Might this make a difference?

Thanks for your time, Jacob.
Brian

On Thu, Mar 31, 2016 at 5:05 AM, hotline <hotline at transsolar.com> wrote:

> Dear Brian,
>
>
>
> just use the export function. It'll create an IDF file from your opened B7
> file. The update function is for older files only, when not all information
> required for writing an IDF file were stored in the B17 file.
>
>
>
> Attached you can find a short tutorial on how to import, export and
> reimport a 3D building project.
>
>
>
> Best
> Jakob
>
>
>
>
>
>
> _________________________________________________________________________________________________
>
>
>
> *Jakob Merk*
>
> TRNSYS Software Team
>
>
> *Transsolar Energietechnik GmbH*
>
> Curiestraße 2
>
> 70563 Stuttgart
>
> Fax:        +49 711 67976-11
> Email:    hotline at transsolar.com
>
> Web:      www.trnsys.de
>
>
>
> *Von:* TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] *Im
> Auftrag von *Brian Raichle
> *Gesendet:* Donnerstag, 31. März 2016 03:37
> *An:* TRNSYS-users at lists.onebuilding.org
> *Betreff:* [TRNSYS-users] Editing TRNSYS 3D buildings
>
>
>
> Hello,
>
> After creating a multizone building using TRNSYS3d (in SketchUp Make 2016)
> and successfully linking to it in Sim Studio, I can't figure out how to
> edit the building in TRNSYS3d (i.e. create a new .idf file)  and have my
> existing Sim Studio model (looking for _b17.idf and .b17) see the new
> building.
>
>
>
> The "Update TRNSYS3D file" option in TRNBuild is grayed out.
>
>
>
> Any hints?
>
>
>
> Thanks,
>
> Brian
>
>
>
> --
>
> Brian W. Raichle
>
> Professor and Assistant Chair
>
> Department of Sustainable Technology & the Built Environment
>
> Appalachian State University
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>


-- 
Brian W. Raichle
Professor and Assistant Chair
Department of Sustainable Technology & the Built Environment
Appalachian State University
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160331/5882372c/attachment-0003.htm>