[TRNSYS-users] Absorption chiller cooling load

[Fady116155]

Dear Trynsys users,


I am working on a solar absorption system project. almost everything is ready for my simulation except for the cooling load. I am planing to get the building hourly cooling load by another software like HAP and save the results in an excel file maybe. My question now is how can i import the hourly cooling loads into Trynsys and link it to the absorption chiller?

I thought i could obtain the hourly chilled water inlet temperature  by excel through the equation: Qload= Mass flow rate* Cp * (Chilling water inlet temperature - chilling water outlet temperature)  and then use the hourly chilled water inlet temperature as an input to the chiller but I'm not sure about that. and If so, how can I do import the chilling water temperature data to trynsys?


Thank you so much

Fady Anees

The British University in Egypt

Fady116155 at bue.edu.eg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160319/36ec5c01/attachment-0003.htm>