[TRNSYS-users] Enquiry about Type536

Jeremy Osborne jeremy.osborne at energyae.com
Thu Mar 17 21:16:37 PDT 2016


Hi C. K. Lee, 

The Fortran code for TYPE 536 limits to a maximum of 10 inputs in Line 28 and Line 159 of Type536.f90 . 
Find the code in C:\Trnsys17\Tess Models\SourceCode

You can adjust the code and re-compile the project or ask your distributor about doing this for you. 

I hope this helps. Feel free to ask any further questions. 

Jeremy Osborne 
Director 

Energy Analysis & Engineering - Enabling innovation for a sustainable future
T: +61 2 8003 4323 | M: +61 4 000 63327 | E: jeremy.osborne at energyae.com
608 Harris St Sydney NSW 2007 Australia | http://www.energyae.com



-----Original Message-----
From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On Behalf Of C K Lee
Sent: Friday, 18 March 2016 11:58 AM
To: Trnsys discussion group <trnsys-users at lists.onebuilding.org>
Subject: [TRNSYS-users] Enquiry about Type536

Dear all.

I am sorry if this question had been raised before.  I recently use to linear parabolic concentrator (Type536) to model a solar cooling system. 
  However, I find that if the number in series (Parameter 1) exceeds 10, the following error occurs.


*** Fatal Error at time   :         0.000000
     Generated by Unit     :    21
     Generated by Type     :   536
     TRNSYS Message    125 : The referenced Unit has a bad parameter 
value.
     Reported information  : Parameter # 1, Reported Problem: The number of collectors connected in series must be at least 1 and less than the maximum.


I cannot find any hint in the manual.  As I am using TRNSYS17, I don't have the source code.  Does anyone know what's going wrong?  Moreover, I find that if the total number of solar collectors remain the same, the connection configuration (combination of Parameters 1 and 2) of the solar collectors do not seem to have any evident effect on the system performance.  Does anyone encounter this before?  Finally, is it common that tracking be provided when this kind of solar collectors are used in actual practice, as the model itself does not offer this option?  Thank you!

Best Regards
C. K. Lee
Research Fellow
City University of Hong Kong

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org



More information about the TRNSYS-users mailing list