[TRNSYS-users] PCM wall

[Katherine D'Avignon]

Hello Meriem,

A colleague of mine built a TRNSYS model for walls with a PCM layer as 
part of his Ph.D. thesis. You can access his thesis at this address:
https://publications.polymtl.ca/view/person/Delcroix=3ABenoit=3A=3A.html

Good luck,

Katherine D'Avignon


On 2016-03-09 12:10, Meriem LEBIED wrote:
>
> Hi Trnsys users,
>
> I would like to model walls of my building with a PCM layer. I use 
> TRNSYS 16.1 and I don't know wich Type should I use and how can I find it.
> Thank you for your answer.
>
> Best regards,
>
> --
>
> Meriem Lebied
>
> PhD student
>
> Kooperativ Promovierende
>
> HTW Berlin
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160309/ba92a844/attachment.htm>