[TRNSYS-users] Changing the location !

[David BRADLEY via TRNSYS-users]

Joseph,

   My first thought was that you should make sure to specify an entire 
path starting with the drive letter but it appears that you have already 
done so. Here are a few other things to check:

1. try a path that does not have a space in it.

2. try to keep the files out of the \Users\ directory. This directory 
sometimes appears to be on the c:\ drive root but in fact is buried 
somewhere deep inside the the \Windows directory.

3. check the location of the file and make sure that there is not a 
blank file in that location (you can tell if it is blank it will have a 
0KB size.)

kind regards,

  David



On 07/21/2016 09:10, Joseph Oudi via TRNSYS-users wrote:
> Dear users hello all,
>
> I always have this problem about location of my trnsys project, if I 
> changed the location of my project I get, after running a simulation, 
> this error (look at it in attached file). Why do I have this problem 
> if I change the location of project file ??
> Thank you
>
> Regards,
> Joseph
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160721/2b407d8b/attachment-0003.htm>