[TRNSYS-users] Event Counter

[Brendan McCormick via TRNSYS-users]

Thanks very much Jeremy…TYPE 93 combined with a few GE/LT statements works perfectly.

Cheers,

Brendan

From: Jeremy Osborne [mailto:jeremy.osborne at energyae.com]
Sent: Saturday, July 16, 2016 11:04 PM
To: Brendan McCormick <brendan.mccormick at queensu.ca>; TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Subject: RE: Event Counter

HI Brendan,

We use TYPE 93 Input Value Recall to look at the value at the previous time step to the current time step. And a conditional GT(X1,X2) statement to count only the changes in a particular direction like turn off as a posted to turning on. Then use a TYPE 55 integrator to count the events.

I hope this helps.

Cheers,
Jeremy

--
Jeremy Osborne
Director

Energy Analysis & Engineering – Enabling innovation for a sustainable future
T: +61 2 8003 4323 | M: +61 4 000 63327 | E: jeremy.osborne at energyae.com<mailto:jeremy.osborne at energyae.com>
608 Harris St Sydney NSW 2007 Australia | http://www.energyae.com<http://www.energyae.com/>




From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On Behalf Of Brendan McCormick via TRNSYS-users
Sent: Saturday, 16 July 2016 4:22 AM
To: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>>
Subject: [TRNSYS-users] Event Counter

Hi TRNSYS users,

I’m looking for an event counter that can count the number of times a pump has turned on in a simulation. I found a thread in the user-archives that discussed an event counter, but the file available is a .BIN that I cannot seem to mount. Does anyone know of or have an event counter they could share?

Thanks,

Brendan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160717/c350742d/attachment-0002.htm>