[TRNSYS-users] Photovoltaic and battery

David BRADLEY via TRNSYS-users trnsys-users at lists.onebuilding.org
Fri Jul 8 10:49:19 PDT 2016


You'll need to contact the person in charge of the TRNSYS license at 
your institution. If the latest version they have is also 17.01 then 
they'll need to contact the distributor from whom your institution 
purchased TRNSYS. If you aren't sure who to contact, please send me the 
information from your user17.id file (which can be opened with a text 
editor) and I can put you in touch with the appropriate person.  Please 
send the information directly to me and please do not copy the whole 
TRNSYS user list in your email!

kind regards,

  David



On 07/08/2016 11:13, Domenico Mazzeo wrote:
>
> Dear David Bradley,
> thank you for the quick answer.
> I have the 17.01 version and I haven't in the directory the example.
> How can I obtain the updating of trnsys and the example required?
> Best regards.
> Domenico Mazzeo
>
> Il 08 Lug 2016 17:37, "David BRADLEY" <d.bradley at tess-inc.com 
> <mailto:d.bradley at tess-inc.com>> ha scritto:
>
>     Domenico,
>
>      If you are using the most recent version of TRNSYS (17.02.0005)
>     then there is an example called ..\Trnsys17\Examples\PVT\PVT.tpf
>     that includes a PV, a battery, a charge controller/inverter, and a
>     load. Please note that if you are using Type47 for your battery
>     model then there is an output called "state of charge," whose
>     units are Ah (amp-hours) and that there is another output called
>     "fractional state of charge." The fractional state of charge
>     should not go much over 1 but the state of charge can. Please also
>     note that the "state of charge" output is for one cell in the
>     battery, not for the entire battery bank.
>
>     kind regards,
>
>      David
>
>
>
>     On 07/08/2016 02:59, Domenico Mazzeo via TRNSYS-users wrote:
>>
>>     Dear all,
>>     I am looking for simulate e photovoltaic system with battery and
>>     regulator and inverter.
>>     Can you help me to connect them in order to avoid mistake?
>>     Where I can find an example?
>>     In my scheme the state of charge always increase without remain
>>     between 0 and 1.
>>     Thank you
>>
>>
>>
>>     _______________________________________________
>>     TRNSYS-users mailing list
>>     TRNSYS-users at lists.onebuilding.org
>>     <mailto:TRNSYS-users at lists.onebuilding.org>
>>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>     -- 
>     ***************************
>     David BRADLEY
>     Principal
>     Thermal Energy Systems Specialists, LLC
>     22 North Carroll Street - suite 370
>     Madison, WI  53703 USA
>
>     P:+1.608.274.2577 <tel:%2B1.608.274.2577>
>     F:+1.608.278.1475 <tel:%2B1.608.278.1475>
>     d.bradley at tess-inc.com <mailto:d.bradley at tess-inc.com>
>
>     http://www.tess-inc.com
>     http://www.trnsys.com
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160708/3592d8c4/attachment.htm>


More information about the TRNSYS-users mailing list