[TRNSYS-users] windspeed tess tool

benjamin stobbe benjamin_stobbe at hotmail.com
Wed Jan 27 23:54:24 PST 2016


Thanks Jens, also for the fast reply

> To: trnsys-users at lists.onebuilding.org
> From: jens.jungclaus at fh-flensburg.de
> Date: Thu, 28 Jan 2016 07:56:00 +0100
> Subject: Re: [TRNSYS-users] windspeed tess tool
> 
> Hi,
> 
> you have to write:
> 
> (height module/height wheater station)**1/a
> 
> Best regards,
> Jens
> 
> 
> Am 28.01.2016 um 07:46 schrieb benjamin stobbe:
> > Dear people,
> >
> > While i was implementing a way to take the height of the building into 
> > account I found out it is not possible to do something to the power in 
> > the calculator so i can not do (height module/height wheater 
> > station)^1/a, but then i came across the windspeed calculator tool in 
> > the tess library but this was does not have documentation yet so i 
> > opened the sourcecode but i could not figure out if you did to the 
> > power or used the one with ln function? I'm not a hero in Fortran, i 
> > saw something about making boundaries. So I hope someone can make this 
> > clear to me
> >
> > Best regards,
> >
> > Benjamin Stobbe
> >
> >
> > _______________________________________________
> > TRNSYS-users mailing list
> > TRNSYS-users at lists.onebuilding.org
> > http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160128/842e206c/attachment.htm>


More information about the TRNSYS-users mailing list