[TRNSYS-users] Equation functions discription

[Alastair McDowell]

Hello Sandeep,

See page 25 in Volume 6 help guide for a description of the equations functions. You may find the Type 48 regulator helpful for controlling the battery state of charge.

Kind regards,

Alastair McDowell
Engineering Consultant
Energy Analysis & Engineering - Enabling innovation for a sustainable future
T: +61 450 600 842
E: alastair.mcdowell at energyae.com<mailto:alastair.mcdowell at energyae.com>
608 Harris St Sydney NSW 2007 Australia | http://www.energyae.com<http://www.energyae.com/>



From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On Behalf Of Sandeep Singh Chahal
Sent: Thursday, 25 February 2016 8:08 a.m.
To: trnsys-users at lists.onebuilding.org
Subject: [TRNSYS-users] Equation functions discription


Hello TRNSYS user,



I am trying to write down an if condition using (gt) function in equation. Simulation time is Jan to Dec and goal is to charge the battery bank when solar power is more then energy consumption and draw power from battery bank when solar power is less then power consumption by a house.



>From Jan to April: battery state of charge gives acceptable results but after April it goes to negative infinity.



CAn any one share where I can find description for functions available in equation.( TRNSYS 17 ).





  I there if reference about it here http://lists.onebuilding.org/htdig.cgi/trnsys-users-onebuilding.org/2006-December/015165.html         ( I believe its for TRNSYS 16)



Thanks,

Sandeep Chahal

UAB

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160224/60f2f46f/attachment-0003.htm>