[TRNSYS-users] TRNFLOW and thermal relation between two airnodes

[hotline]

Dear TRNFlow-User,

attached you can find a TRNFlow-Tutorial. You can also find in in your TRNSYS directory under …\Studio\Lib\Comis\Documentation\.
If this is not helpful, please send your TRNSYS-project to hotline at trnsys.de<mailto:hotline at trnsys.de> and we will have a look at it.

Best regards
Jakob Merk



_________________________________________________________________________________________________

Jakob Merk
TRNSYS Software Team

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Fax:        +49 711 67976-45
Email:    hotline at transsolar.com<mailto:hotline at transsolar.com>
Web:      www.trnsys.de<http://www.trnsys.de/>

Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Wirich Freppel
Gesendet: Freitag, 19. Februar 2016 16:07
An: trnsys-users at lists.onebuilding.org
Betreff: [TRNSYS-users] TRNFLOW and thermal relation between two airnodes

Hi all,
I designed with google sketchup 2 boxes, 1m3 each. Those two boxes are adjacent to each other.
I set up the adjacent surface between both as a virtual surface, expecting that the two airnodes would be linked to each other (air motion link).
I assumed that if I set up a ventilation rate in one airnode, the other airnode would be affected, and the two air temperatures would be really close to each other. Because I assumed that thanks to the virtual surface, the two airnodes would act like one airnode.
However there is not such link between both according to the air temperature result.
Therefore, I coupled the two airnodes in the TYP56, but i'm surprised that I have to set up a ventilation rate between the airnodes.
Also, I dont understand why there are "upper" and "lower" configurations.

Finally, I tried to couple the two airnodes using TRNFLOW, but when I use "large opening", nothing appear on the left frame, which still shows "undefined". Thus I get an error when I try to close TRNBUILD.
I think I don't use TRNFLOW or the coupling option correctly. Can someone help me or direct me to a tutorial so that I can learn how to couple the two airnodes properly?
Thanks a lot in advance
Regards


--
Wirich Freppel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160222/75ffb105/attachment-0003.htm>