[TRNSYS-users] Linear parabolic concentrator_Type 536

Ratnalee Patil Ratnalee at innovativedesign.net
Wed Feb 10 14:21:37 PST 2016


Thanks Angel, but I had already checked the path,  file size and the contents of the external file. The file does have 100 data points.
In parameters, the number of data points is defined as 10 each for transverse and longitudinal incidence angles (0 to 90). So no issues there.

Anything else that could be wrong?
Thanks again..

Regards,
Ratnalee Patil, AAIA
B.Arch., M.A.Sc. Engineering
Energy Specialist
Innovative Design
850 West Morgan St.  Raleigh, NC  27603
Ph: (919) 832-6303 Fax: (919) 832-3339
www.innovativedesign.net<http://www.innovativedesign.net/>


From: Angel Carrera [mailto:angel.carrera at aiguasol.coop]
Sent: Wednesday, February 10, 2016 2:20 PM
To: TRNSYS users mailing list at OneBuilding. org
Subject: Re: [TRNSYS-users] Linear parabolic concentrator_Type 536


Hi,

I would suggest to check at the "externa files" tab of the proforma that the path is ok and the file has not 0 size. If that's ok, at parameters tab, check that those indicating the number of points at the file are set correctly, regards

Angel
El 10/2/2016 18:51, "Ratnalee Patil" <Ratnalee at innovativedesign.net<mailto:Ratnalee at innovativedesign.net>> escribió:
Hello TRNSYS users,

I am working on a model with flat plate collectors, thermal storage, external load files, absorption chiller, pumps, controllers, etc. It runs fine.
However, when I change the collector type to linear parabolic concentrator (Type 536) with sample file for Bi-Axial IAMs, I am getting this error : “The utility subroutine DATA cannot read the specified input data file. Make sure that the file is ASSIGNed correctly and that the file has the correct format.    Reported information  : ASSIGNED LOGICAL UNIT 10”

Any ideas/suggestions?
Thank you.

Regards,
Ratnalee Patil, AAIA
B.Arch., M.A.Sc<http://M.A.Sc>. Engineering
Energy Specialist
Innovative Design
850 West Morgan St.  Raleigh, NC  27603
Ph: (919) 832-6303<tel:%28919%29%20832-6303> Fax: (919) 832-3339<tel:%28919%29%20832-3339>
www.innovativedesign.net<http://www.innovativedesign.net/>


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160210/0340548a/attachment-0003.htm>


More information about the TRNSYS-users mailing list