[TRNSYS-users] Question about fan-coil type928

[Theeraphat Sri-on]

Hello every one,

I tired to simulate the air-condition system via an absorption chiller and
used fan coil type928 to supply cold air into the room, I set Motor Heat
Loss Fraction = 0 and Damper

 Position = 0, but I found a temperature of air increased went the chilled
water do not supply to fan coil such as

inlet air temperature = 23 C,

inlet chilled water temperature = 9 C,

outlet chilled water temperature = 9 C and

chilled water flow rate = 0 kg/s.

but I found the temperature of air at outlet fan coil has increased = 25 C.
Can anyone describe about how to type928 work and why a temperature of air
has increase when fan coil do not has a flow rate of chilled water?


Theeraphat
-- 
Best regards,
----------
*Theeraphat Sri-on*
*M.Eng. Student*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160210/3d92c22d/attachment-0003.htm>