[TRNSYS-users] Absorption chiller

[Angel Carrera]

Hi,

I giess that the flowrate you are giving as an input is too low related to
the power requirement at the evaporator.
I suggest you to read the descripción of the type to understand how it is
working, regards

Angel
El 10/2/2016 20:14, "Hsein Moussawi" <hsein_moussawi at hotmail.com> escribió:

> Hello there,
>
> I am using an exhaust fired absorption chiller in a certain system. After
> simulation the temperature of the hot fluid exiting the chiller is observed
> to be negative in many instances. This is impossible in reality. I am
> wondering if anyone faced a similar problem!?
>
> My question is:
>
> Is there a way by which I can limit the output of a component to a certain
> point?? (e.g. outlet temperature of chiller to ambient temperature)
>
> Thanks in advance TRNSYS community,
>
> Best regards.
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160210/88ca59d1/attachment.htm>