[TRNSYS-users] Linear parabolic concentrator_Type 536

[Angel Carrera]

Hi,

I would suggest to check at the "externa files" tab of the proforma that
the path is ok and the file has not 0 size. If that's ok, at parameters
tab, check that those indicating the number of points at the file are set
correctly, regards

Angel
El 10/2/2016 18:51, "Ratnalee Patil" <Ratnalee at innovativedesign.net>
escribió:

> Hello TRNSYS users,
>
>
>
> I am working on a model with flat plate collectors, thermal storage,
> external load files, absorption chiller, pumps, controllers, etc. It runs
> fine.
>
> However, when I change the collector type to linear parabolic concentrator
> (Type 536) with sample file for Bi-Axial IAMs, I am getting this error :
> “The utility subroutine DATA cannot read the specified input data file.
> Make sure that the file is ASSIGNed correctly and that the file has the
> correct format.    Reported information  : ASSIGNED LOGICAL UNIT 10”
>
>
>
> Any ideas/suggestions?
>
> Thank you.
>
>
>
> Regards,
>
> Ratnalee Patil, AAIA
>
> B.Arch., M.A.Sc. Engineering
>
> Energy Specialist
>
> Innovative Design
>
> 850 West Morgan St.  Raleigh, NC  27603
>
> Ph: (919) 832-6303 Fax: (919) 832-3339
>
> www.innovativedesign.net
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160210/db607645/attachment.htm>