[TRNSYS-users] circulating water

Amirreza Heidary via TRNSYS-users trnsys-users at lists.onebuilding.org
Sat Dec 24 03:33:44 PST 2016


There is a  circulating water in my model, outlet water temperature of type
66 is input for type 32, and the outlet water temperature in type 32 is as
input for type 66. (the red lines)
creating this loop causes my simulation to stop at 70 hours after
simulation start without any errors. deleting this loop will solve this
problem. I have set the components order based on the flow path. Do you
have any comment to solve it?
Thank you
[image: Inline image 1]

--------------------------------------------------------------------------------------------------------------------------------------------------

*amirrezaheidary*
*master student of energy systems Engineering*
*Sharif university of technology*
*Tehran-Iran*
*E-mail address*:

heidari at energy.sharif.edu

a <sm_mousavi at pwut.ac.ir>mirrezaheidarysbu at gmail.com

*P* *Save a tree... Please don't print this E-mail unless you really need
to.*








 Sent with Mailtrack
<https://mailtrack.io/install?source=signature&lang=en&referral=amirrezaheidarysbu@gmail.com&idSignature=22>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161224/76bdf79f/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 32366 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161224/76bdf79f/attachment-0003.png>


More information about the TRNSYS-users mailing list