[TRNSYS-users] Internal load!

[hotline via TRNSYS-users]

Dear user,

I’d suggest you to activate the output Balance 4 (BAL_4) in TRNBuild. After a simulation run you will get a new file with named Energy_zone.BAL.
It shows all values for Balance 4 (see documentation chapter 5.2.3.5.4.) for each zone. B4_QGINT is the value for all radiative and convective internal gains per simulation step.

Best
Jakob


_________________________________________________________________________________________________

Jakob Merk
TRNSYS Software Team

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Fax:        +49 711 67976-11
Email:    hotline at transsolar.com<mailto:hotline at transsolar.com>
Web:      www.trnsys.de<http://www.trnsys.de/>



Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von ??? via TRNSYS-users
Gesendet: 22 December 2016 02:38
An: trnsys-users at lists.onebuilding.org
Betreff: [TRNSYS-users] Internal load!

again hi, all users!


I have another question.

I want to know changing of internal load.

I think in type 56, (with TRNbuild)

-only infiltration
-no Air conditioner
-no ventilation
-high levels of u-value windows and wall


maybe, internal load increase rapidly in the noon (summer), isn't it?

so, I want to see this changing phenomenon. (like graph)

how can i get this ...? I really want to know, ..

thank you all!


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161222/3748a8d8/attachment-0003.htm>