[TRNSYS-users] type 557 boreholes in series

[Jeff Thornton via TRNSYS-users]

Louis,

Are you reducing the flow rate such that you have the same flow rate per
bore when you connect them in series? I.E. The total flow rate for 6
bores in series should only be 1/6 of the flow if they were all in
parallel.

Jeff

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 12/14/2016 12:59 pm, via TRNSYS-users wrote: 

> Dear all, 
> 
> I want to see the effect of the number of boreholes in series in a typical ground storage application. I have 72 boreholes and I change the number of boreholes in series as well as the number of radial regions to 1, 6 12, etc… and the results are always unchanged ?? 
> 
> Does anyone knows why ? 
> 
> Thank you very much 
> 
> Louis Lamarche 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161214/09edb23c/attachment-0003.htm>