[TRNSYS-users] Cooling load and humidity changes

hotline via TRNSYS-users trnsys-users at lists.onebuilding.org
Tue Dec 13 05:27:57 PST 2016


Dear Mohammad,

I’d recommend you to read section 5.2.3.4. Outputs of the multizone building docu to find out how to add outputs.

NType 9 – RELHUM - gives the relative Humidity
NType 2 - QSENS - gives sensible energy demand (positive values are cooling)
NType 12 – QSOLTR – gives total solar radiation transmitted through all external windows of an airnode


Best
Jakob
_________________________________________________________________________________________________

Jakob Merk
TRNSYS Software Team

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Fax:        +49 711 67976-11
Email:    hotline at transsolar.com<mailto:hotline at transsolar.com>
Web:      www.trnsys.de<http://www.trnsys.de/>



Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Mohammad Vahid via TRNSYS-users
Gesendet: 07 December 2016 07:47
An: trnsys-users at lists.onebuilding.org
Betreff: [TRNSYS-users] Cooling load and humidity changes

Dear all,

I'm simulating a building with the help of the Building wizard of the software. The only output that I can get is the temperature changes and it seems to be correct. My question is, how can I see the humidity changes in the building, Q gained from the sun, and the cooling load of the cooling system.

Thanks in advance,
Masih
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161213/3b672d60/attachment-0003.htm>


More information about the TRNSYS-users mailing list