[TRNSYS-users] move a AirNode

[hotline via TRNSYS-users]

Dear Chiara,

the airnode is not positioned at all. Each airnode represents a volume of air where the air in this volume is ideally mixed.


Best
Jakob

_________________________________________________________________________________________________

Jakob Merk
TRNSYS Software Team

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Fax:        +49 711 67976-11
Email:    hotline at transsolar.com<mailto:hotline at transsolar.com>
Web:      www.trnsys.de<http://www.trnsys.de/>



Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Chiara Colucci via TRNSYS-users
Gesendet: 05 December 2016 11:18
An: TRNSYS users mailing list at OneBuilding.org
Betreff: [TRNSYS-users] move a AirNode

Hi, I have a parallelepiped building, the height and width are 13.5 m and the length is 110.5 m. It is modeled as thermal zone with Sketchup in TRNSYS 17.
I believe that it is made of a single AirNode positioned at the center of the thermal zone. Can you move the AirNode? I would like the results of AirNode at a height of 1.1 m.

Thanks a lot in advance,
Chiara Colucci
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161205/d05dcceb/attachment-0003.htm>