[TRNSYS-users] type32- log of negative number error

[Amirreza Heidary via TRNSYS-users]

Hi
In my simulation there is type 32 (Cooling coil). when I run my model
without an equation it runs properly. but runnig my model using the
equation (named Sum in model) it runs for first hours but it stops with the
following error. The equation is just some of the heat rates to be used in
plotter. following is the error and the simulation environment.
what should I do to solve it?
[image: Inline image 2]
[image: Inline image 1]

--------------------------------------------------------------------------------------------------------------------------------------------------

*amirrezaheidary*
*master student of energy systems Engineering*
*Sharif university of technology*
*Tehran-Iran*
*E-mail address*:

heidari at energy.sharif.edu

a <sm_mousavi at pwut.ac.ir>mirrezaheidarysbu at gmail.com

*P* *Save a tree... Please don't print this E-mail unless you really need
to.*








 Sent with Mailtrack
<https://mailtrack.io/install?source=signature&lang=en&referral=amirrezaheidarysbu@gmail.com&idSignature=22>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161227/313f9c56/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 31919 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161227/313f9c56/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 4344 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161227/313f9c56/attachment-0003.png>