[TRNSYS-users] Simulation Stuck

[Florian Galler via TRNSYS-users]

Dear TRNSYS users

I have a quite complex solar cooling DEC simulation. I managed to solve
nearly all problems but one. There is this warning: "Heater contr. temp.
out of limit:  x.xxxx". At every timestep this warning appears the
simulation gets stuck for a few seconds (10-30). I did not manage to let
it run throug the whole year simulation (8760hrs). Type and unit are
always 0 - I have no unit 0 in my simulation???



Searching on google only took me to this page
https://www.mail-archive.com/trnsys-users@engr.wisc.edu/msg00785.html .
As I do not have a type140 in my simulation I do not know from where
this warning occurs.

Would be very glad if someone could help.

Kind regards
Florian Galler

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161223/4a50f9d9/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lbclhhhfjmhajdho.png
Type: image/png
Size: 81947 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161223/4a50f9d9/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3622 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161223/4a50f9d9/attachment-0001.bin>