[TRNSYS-users] TRNSYS-users Digest, Vol 140, Issue 15

Fri Aug 26 08:53:59 PDT 2016

Hi Vincent,

I experienced the same problem a couple of weeks ago. You should probably
contact your TRNSYS distributor (with the following information: TRNSYS
version and the limit you want)
I contacted David Bradley to have recompiled TRNDLL.dll and TRNDll.lib
files. Then, I just replaced each file in the ..\TrnsysXX\Exe directory.
It worked like a charm.
I hope it helps!
Best regards,

Anthony Rey

2016-08-26 11:44 GMT-04:00 via TRNSYS-users <
trnsys-users at lists.onebuilding.org>:

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.onebuilding.org/listinfo.cgi/trnsys-users-
> onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         trnsys-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>    1. Error 24 - nMaxEquations ? (Vincent MORELLE via TRNSYS-users)
>    2. Error 24 - nMaxEquations ? (Vincent MORELLE via TRNSYS-users)
>
>
> ---------- Message transféré ----------
> From: Vincent MORELLE via TRNSYS-users <trnsys-users at lists.onebuilding.org
> >
> To: "'trnsys-users at cae.wisc.edu'" <trnsys-users at cae.wisc.edu>, "
> trnsys-users-bounces at cae.wisc.edu" <trnsys-users-bounces at cae.wisc.edu>, "
> trnsys-users at lists.onebuilding.org" <trnsys-users at lists.onebuilding.org>
> Cc:
> Date: Fri, 26 Aug 2016 17:44:07 +0200
> Subject: [TRNSYS-users] Error 24 - nMaxEquations ?
>
> Dear TRNSYS Users,
>
>
>
> Trying to run a simulation, I get the error 24 :
>
> *"The size of the array which holds the operation codes for EQUATIONs and
> CONSTANTs in the TRNSYS input file has been exceeded. Try reducing the use
> of EQUATIONs and CONSTANTs in your input file if possible or increase the
> limit on the maximum numbr of equations that TRNSYS allows."*
>
>
>
> I understand that I have to increase the maximum allowable number of
> equations in the TrnsysConstants.f90 file, and then to recompile the TRNDll
>
> *(http://onebuilding.org/archive/trnsys-users-onebuilding.org/2014-May/026347.html
> <http://onebuilding.org/archive/trnsys-users-onebuilding.org/2014-May/026347.html>)*
>
>
>
> I tried to read the Programmer’s Guide but I don’t understand how does it
> works to recompile the TRNDll in order for the changes to take effect (and
> I don’t have a Fortran compiler yet…).
>
>
>
> Does anyone have an idea to solve my problem ? (hard to remove equations
> from my project…)
>
>
>
> Thank you
>
> Best regards,
>
>
>
> *Vincent MORELLE*
>
> *Ingénieur Qualité Environnementale du Bâtiment*
>
>
>
> *KATENE*
>
> Bâtiment Woopa <http://www.woopa.coop/>
>
> 10 avenue des canuts, 69120 Vaulx-en-Velin
>
> Standard : 04.37.45.33.33 - *Ligne directe : 04.37.45.33.48*
>
> www.katene.coop - www.quadriplus-groupe.com
>
>
>
>
> ---------- Message transféré ----------
> From: Vincent MORELLE via TRNSYS-users <trnsys-users at lists.onebuilding.org
> >
> To: "'trnsys-users at cae.wisc.edu'" <trnsys-users at cae.wisc.edu>, "
> trnsys-users-bounces at cae.wisc.edu" <trnsys-users-bounces at cae.wisc.edu>, "
> trnsys-users at lists.onebuilding.org" <trnsys-users at lists.onebuilding.org>
> Cc:
> Date: Fri, 26 Aug 2016 17:44:07 +0200
> Subject: [TRNSYS-users] Error 24 - nMaxEquations ?
>
> Dear TRNSYS Users,
>
>
>
> Trying to run a simulation, I get the error 24 :
>
> *"The size of the array which holds the operation codes for EQUATIONs and
> CONSTANTs in the TRNSYS input file has been exceeded. Try reducing the use
> of EQUATIONs and CONSTANTs in your input file if possible or increase the
> limit on the maximum numbr of equations that TRNSYS allows."*
>
>
>
> I understand that I have to increase the maximum allowable number of
> equations in the TrnsysConstants.f90 file, and then to recompile the TRNDll
>
> *(http://onebuilding.org/archive/trnsys-users-onebuilding.org/2014-May/026347.html
> <http://onebuilding.org/archive/trnsys-users-onebuilding.org/2014-May/026347.html>)*
>
>
>
> I tried to read the Programmer’s Guide but I don’t understand how does it
> works to recompile the TRNDll in order for the changes to take effect (and
> I don’t have a Fortran compiler yet…).
>
>
>
> Does anyone have an idea to solve my problem ? (hard to remove equations
> from my project…)
>
>
>
> Thank you
>
> Best regards,
>
>
>
> *Vincent MORELLE*
>
> *Ingénieur Qualité Environnementale du Bâtiment*
>
>
>
> *KATENE*
>
> Bâtiment Woopa <http://www.woopa.coop/>
>
> 10 avenue des canuts, 69120 Vaulx-en-Velin
>
> Standard : 04.37.45.33.33 - *Ligne directe : 04.37.45.33.48*
>
> www.katene.coop - www.quadriplus-groupe.com
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160826/0bcccd2d/attachment-0002.htm>