[TRNSYS-users] weather file coupling with surfaces
hotline via TRNSYS-users
trnsys-users at lists.onebuilding.org
Wed Aug 31 01:33:46 PDT 2016
Dear Rodrigo,
if you use SketchUp and import the idf file using Simulation Studio 3d building Wizard, external surfaces are automatically being recognized and connected to the correct solar radiation by using TRNBuilds internal calculation of orientations.
Best
Jakob
_________________________________________________________________________________________________
Jakob Merk
TRNSYS Software Team
Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Fax: +49 711 67976-11
Email: hotline at transsolar.com<mailto:hotline at transsolar.com>
Web: www.trnsys.de<http://www.trnsys.de/>
Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Rodrigo Mora via TRNSYS-users
Gesendet: 30 August 2016 22:33
An: trnsys-users at lists.onebuilding.org
Betreff: [TRNSYS-users] weather file coupling with surfaces
Hello,
When the 3D geometry is imported from Sketchup or CONTAM do I still need to manually couple each external surface with the corresponding total and beam solar radiation and the incidence angle from the weather file?
Thanks,
Rodrigo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160831/904583dd/attachment-0001.htm>
More information about the TRNSYS-users
mailing list