[TRNSYS-users] inside convective heat transfer coefficient

adnan rasheed via TRNSYS-users trnsys-users at lists.onebuilding.org
Tue Aug 16 20:14:11 PDT 2016


Hello everyone,

i want to use temperature dependent correlation of inside convective heat
transfer coefficient of the wall in TRNSYbuild rather than to use fixed
default value. As inside coefficient depends upon difference of the air
temp inside and wall internal surface temperature. i want to use TRNSbuild
surface temperature output as an input for defining
inside convective heat transfer coefficient = 1.247 (Tair-Tsurf)^1/3 can i
use these inputs from TYPE 56 in simulation studio and then after putting
equation again insert in type 56. or any other way to handle this problem.

Thanks you for killing your time to read my problem.

Thanks
Adnan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160817/96242d72/attachment.htm>


More information about the TRNSYS-users mailing list