[TRNSYS-users] Error when using parametric table and Type 56

[Christian Herløv Krintel]

Dear Jakob,
This solved my problem. I renamed the .b17 file and now the parametric 
table runs!
Thank you very much.

Best Regards
Christian


hotline skrev den 2016-04-21 15:29:
> Dear Christian,
> 
> your .bui file must have a different name to the .dck file. That
> should solve your problem.
> 
> Best Jakob
> 
> _________________________________________________________________________________________________
> 
> Jakob Merk
> TRNSYS Software Team
> 
> Transsolar Energietechnik GmbH
> Curiestraße 2
> 70563 Stuttgart
> Fax:        +49 711 67976-11
> Email:    hotline at transsolar.com
> Web:      www.trnsys.de
> 
> 
> 
> 
> -----Ursprüngliche Nachricht-----
> Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org]
> Im Auftrag von Christian Herløv Krintel
> Gesendet: Donnerstag, 21. April 2016 14:57
> An: trnsys-users at lists.onebuilding.org
> Betreff: [TRNSYS-users] Error when using parametric table and Type 56
> 
> Dear fellow TRNSYS Users
> I am having some trouble running a parametric table in TRNEdit. I
> created a new mulitzone building project using the wizard.
> I then create the .dck file which I open in TRNEdit. Then I go to
> parametrics > new table, and select START as the parameter, 1 run and
> put in a 0 in the table cell and then TRNSYS > run table. I get the
> following error message:
> 
> Surf-No  Description             Comment
> -1       no OUTPUT's specified   please add at least one OUTPUT
> 
> 
> Then on the next window, a Visual Fortran run-time error shows up:
> 
> forrtl: severe (24): end-of-file during read, unit 33, file
> C:\TRNSYS17\MYPROJECTS\BUILDINGPROJECT\BUILDINGPROJECT1.BLD
> 
> Image    PC    Routine   Line     Source
> Type56.dll
> -
> -
> TRNDLL.DLL
> -
> -
> TRNEXE.exe
> -
> -
> kernel32.dll
> ntdll.dll
> ntdll.dll
> 
> I have also tried to specify the path to the .b17 file as absolute
> path, i.e. C:\Trnsys17\MyProjects\BuildingProject\BuildingProject.b17
> 
> Nothing seems to work. Help is greatly appreciated at this point!
> 
> Best Regards
> Christian
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org