[TRNSYS-users] solar cell performance

[David BRADLEY]

Sandeep,
   the SolarCellPerformance() subroutine contains some code that allows 
it to model both standard flat plate and concentrating PV collectors. CL 
and CH refer to values of the concentration ratio; the ratio of the 
aperture area to the absorber area. Ao is a coefficient that is used in 
the concentrating PV collector model. Values for certain panels are 
given in the \Trnsys17\Examples\Data Files\Type50-SolCel.dat file.

   I might mention as a side note that unless you absolutely have to use 
a call to the SolarCellPerformance() subroutine, I would recommend that 
you rely much more on the PV modeling methods in Types94 and 194. They 
are much more up to date modeling algorithms.

kind regards,
  David


On 04/11/2016 17:42, Sandeep Singh Chahal wrote:
>
> Hello TRNSYS users,
>
>
>  In 07-programmers Guide
>
>
>     Section 7.4.4.14. Solar Cell Performance ( formerly SOLCEL)
>
>
>    CL - a low reference concentration ( what does concentration refer 
> here?)
>
>    CH - high reference concentration ( what does concentration refer 
> here? )
>
>
>        AOMIN - Value of Ao. at concentration of 0 ( what does Ao 
> stands for ? )
>
>
>     DAODC - slope of Ao. VS concentration curve  ( what does Ao stands 
> for here? )
>
>
>     Thanks in advance!
>
>     Sandeep Chahal
>
>     UAB
>
>
>
>
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160412/46b2c280/attachment-0003.htm>