[TRNSYS-users] weather data

[David BRADLEY]

Adnan,
   If you want to run any component with constant input conditions 
(weather or otherwise) you simply set the values that you want to use as 
the input initial value and do not connect any components to them. When 
you run the simulation, the outputs of the component will be computed 
only based on the constant input values. If you are working with a 
Type56 building then you need to change the method of computing solar 
radiation from "internal" to "external by another component." The switch 
for this option is located in TRNBuild; double click the orientation 
definitions in the project window.
kind regards,
  David


On 04/11/2016 20:59, adnan rasheed wrote:
> Hello everyone,
> i want to simulate TRNSYS building simulation with some fixed outside 
> weather conditions and want to see the effect of them on materials 
> property. i am unable to use fix values of parameters like ambient 
> temperature at 0 and sky temp -20. or can i use type 9 and .txt 
> weather file manually with these fix parameters???  can i get any 
> format to edit these parameters moreover i want to run simulation only 
> for 5 hr. ..??? can anybody help me in this regard..
>
>
>
> thanks
> Adnan Rasheed
> PhD Scholar
> KNU south korea
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160412/e05ca5ff/attachment-0003.htm>