[TRNSYS-users] Underfloor heating

[Alastair McDowell]

Hi Christina,

Yes this is possible using Active layers in TRNBuild (See help pdf Vol-05 5.2.4.2.3) or using a component from the ground coupling library (e.g. TESS Ground Coupling Library Type 653).
Kind regards,
Alastair McDowell
Engineering Consultant
Energy Analysis & Engineering – Enabling innovation for a sustainable future
T: +61 450 600 842
E: alastair.mcdowell at energyae.com<mailto:alastair.mcdowell at energyae.com>
608 Harris St Sydney NSW 2007 Australia | http://www.energyae.com<http://www.energyae.com/>

From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On Behalf Of Jsdvlk Fbq E
Sent: Wednesday, April 20, 2016 8:14 AM
To: TRNSYS-users at lists.onebuilding.org
Subject: [TRNSYS-users] Underfloor heating

Hi,
Is it possible to design my own underfloor heating system manually?i'm working on my thesis, developing a prototype tile-heat source and want to see how it behaves as a building heater or cooler.Can this be done with trnsys?
Thank you
Christina
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160420/88adc633/attachment.htm>