[TRNSYS-users] Absorption Chiller

[David BRADLEY]

Houssein,
   My apologies if this is very obvious but once you change the source 
code you need to use a Fortran compiler to compile the code and make a 
new TRNDll.dll. The source code is not recompiled by TRNSYS each time 
and a Fortran compiler is not built in to TRNSYS.
kind regards,
  David


On 04/07/2016 10:07, Hsein Moussawi wrote:
>
> Hello there,
>
>
> I am using an absorption chiller (type 107) in a way to know how much 
> cooling load can be covered from a specified input hot stream.
>
> For that purpose, I had to adjust the source code file and replace the 
> original with an edited one.
>
> The problem is that no changes are observed upon changing the file 
> although the equations are altered.
>
> So the question is: Am I missing anything? Is there something more 
> needed for such procedure?
>
> Any help would be appreciated.
>
>
> Thanks,
>
> Houssein.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160407/4a5f622c/attachment-0001.htm>