[TRNSYS-users] Query about Type 50f

[SANJEEV JAKHAR]

Dear sir,
I am using PV- Thermal collector / concentrating collectors (Type 50f) for
the hybrid (electrical energy and thermal energy) simulation.
Within the Type 50f one of the parameter (no.3) is ratio of aperture area
to absorber area. I am wondering whether this is same as concentration
ratio (CR). However, If so, the range given is 0 to1.
Please guide me how is possible to have CR less than one. If I use the
value more than one it is not accepting and processing.
Please help me for this doubt.
Thanks & Regards,

*Sanjeev Jakhar*
Research Scholar


*Center for Renewable Energy and Environment Development (CREED)Mechanical
Engineering Department*
*Birla Institute of Technology & Science, Pilani*
*Rajasthan - 333031*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150910/c144c615/attachment-0003.htm>