[TRNSYS-users] questions about type 563, type 50 hybrid pv collectors and type 2 controller

[David BRADLEY]

Benjamin,
  It is not really possible to explain what is going on without seeing 
the project. Please send the *.tpf file as well as any other files that 
are needed in order to run the project. Please include a clear 
indication of specific times during the simulation at which you see the 
behavior occurring. Please send the files directly to me and please do 
not copy them to the entire mailing list.
regards,
  David


On 09/07/2015 00:53, Benjamin Stobbe wrote:
>
> Hey everybody,
>
> I’m designing my own hybrid pv system, but the thermal side of the 
> story I come across some problems
>
> I had a question yeah I want to understand the total model sorry for 
> the many questions. I was looking into component type563  to usefull 
> gain and it is a bit strange because it looks like you need a minimum 
> PV power to get some energy gain. Because below 990 kj/hr there is no 
> usefull gain and then suddenly above this 990 kj/hr you have 4560 
> kj/hr. My panel is 4 by 5 but how can you explain this. Another thing 
> in the summer there is no direct sunlight on the panels because it are 
> facades and the sun in Hong Kong is high in the summer. According to 
> the model there is then also no PV power, but there is still diffuse 
> radiance on the panel and this will heat the panel also up so why no 
> PV Power.
>
> I decided to look also into other components so I choose the Type50b 
> and compared the output with type563 but they give different outputs I 
> assured the size of the panels is the same but the output of 50b is 
> much higher than of typ563 in type50b you can choose more parameters 
> then in type563 but I al kept them standard. Also when I try to 
> calculate the efficiency it does not make sence
>
> I looked into the working of controller 2b with their dead bands and 
> looked up the working in the mathematical reference but I checked with 
> logged data and the controller is not working like the formulas make 
> you expect to do. The controller goes for example already on even the 
> difference is lower than the upper band length or goes off when the 
> temperature difference is still bigger than 2 and this should not be 
> happening according to the calculations
>
> I hope to hear from you soon. Thanks in advance.
>
> Best regards,
>
> Benjamin Stobbe
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150908/6698d5a6/attachment-0001.htm>