[TRNSYS-users] (no subject)

[Marcus Gustafsson]

Hi,

The solar gains are found under “balances”. Use NType 960 B4_QSOL: absorbed solar gains on all inside surfaces of zone.

Best regards

Marcus Gustafsson
PhD student

Solar Energy Research Center (SERC)      Dalarna University
Fluid and Climate Technology                  KTH Royal Institute of Technology

+46 (0)23-778563
mgu at du.se<mailto:mgu at du.se>
marcug at kth.se<mailto:marcug at kth.se>


From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On Behalf Of Dalal Badreddine
Sent: den 2 september 2015 11:08
To: TRNSYS users mailing list at OneBuilding.org
Subject: [TRNSYS-users] (no subject)

Good morning,

​I have a little issue, i need the value of  solar gains in each zone and i dont know how to get it. Can somebody help me with that?

Thank you

--

Badreddine Dalal

​




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150902/f3b01ff2/attachment.htm>