[TRNSYS-users] TRNSYS type 155 error

[Alastair McDowell]

Hello Tao,

If you could send me your files I am more than happy to help you find the error in your program.

Kind regards,
Alastair McDowell
Engineering Consultant
Energy Analysis & Engineering - Enabling innovation for a sustainable future
T: +61 450 600 842
E: alastair.mcdowell at energyae.com<mailto:alastair.mcdowell at energyae.com>
608 Harris St Sydney NSW 2007 Australia | http://www.energyae.com<http://www.energyae.com/>

From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On Behalf Of Tao Cao
Sent: Wednesday, September 30, 2015 5:44 AM
To: trnsys-users at lists.onebuilding.org
Subject: [TRNSYS-users] TRNSYS type 155 error

Hello, I'm trying to setup a TRNSYS call MATLAB program, using type 155.

However the program reports following error: 'mFileErrorCode': 200. The error occurred at info(7) =1, info (13) =1.

I checked the related type155.dll file and environment variable settings, they are fine. And all my previous TRNSYS programs using type 155 also work fine.

So I believe it should be something wrong with my new program.

Then I tried to setup several new programs using type 155, surprisingly they all report same error 'mFileErrorCode' 200.

Could anyone give me some suggestions on this ?

Thanks very much.
Tao Cao


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151002/94db8359/attachment.htm>