[TRNSYS-users] Tank with heat exchanger and volume control.

[Alastair McDowell]

Hi Giordani,

You can start with the Solar Hot Water system, available from the new project menu. This tank has no heat exchangers available. You can replace the tank with a different type, by right clicking on the tank – select replace.

Select: C:\TRNSYS17\Studio\Proformas\Thermal Storage\Detailed Fluid Storage Tank\Vertical Cylinder\Uniform Losses and Node Heights\2 Inlets, 2 Outlets\Type60c.tmf, depending on the exact type of your tank.

Study the original model to see how to reconnect the inputs/outputs. If the model has quite similar input/output names, the connections will be preserved, unfortunately not in this case.

You can select how many heat exchangers this tank has from the parameter window (parameter 30).

Edit the Load Profile forcing function to set the times of your water draw.

Kind regards,

Alastair McDowell
Engineering Consultant
Energy Analysis & Engineering – Enabling innovation for a sustainable future
T: +61 450 600 842
E: alastair.mcdowell at energyae.com<mailto:alastair.mcdowell at energyae.com>
608 Harris St Sydney NSW 2007 Australia | http://www.energyae.com<http://www.energyae.com/>



From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On Behalf Of Giordani Tavares
Sent: Thursday, 26 November 2015 10:21 p.m.
To: trnsys-users at lists.onebuilding.org
Subject: [TRNSYS-users] Tank with heat exchanger and volume control.

Hello,

I'm trying to make my first simulation with the TRNSYS and I would like your help please:


How to simulate a tank with an internal heat exchanger (similar to the type 60l) but with a control of fluid volume along the day (350 liters from 08h to 16h and zero liter from 08h to 16h)?

Thank you.

Giordani Tavares
Brazil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151126/18b65acb/attachment-0003.htm>