[TRNSYS-users] BESTEST Simulation in TRNSYS 17

[Eirini Mantesi]

Thank you Domenico! I followed your advice and it worked!


Best,

Eirini


Eirini Mantesi
Research Engineer
School of Civil and Building Engineering
Loughborough University
T: +447462665904
E: E.Mantesi at lboro.ac.uk


________________________________
From: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> on behalf of Domenico Mazzeo <domenico.mazzeo at unical.it>
Sent: Thursday, November 26, 2015 3:00 AM
To: TRNSYS users mailing list at OneBuilding.org
Subject: Re: [TRNSYS-users] BESTEST Simulation in TRNSYS 17


Hello,
You have to use the integrator type to obtain the sensible energy in kJ. Successively you can use the assembly equation or directly excel to convert the quantity in MWh.

Il 26/Nov/2015 03:04, "Eirini Mantesi" <E.Mantesi at lboro.ac.uk<mailto:E.Mantesi at lboro.ac.uk>> ha scritto:

Hello all,



I would like to ask a relatively simple question, I guess. I am new in TRNSYS and I am currently trying to simulate the BESTEST case using TRNBuild, but I can't figure out how I can get the output regarding the sensible loads (ideal loads) of the zone in MWh? The output options that are available in Type 56 are only in KJ/h.


Any help would be very much appreciated.


Kind Regards,

Eirini



Eirini Mantesi
Research Engineer
School of Civil and Building Engineering
Loughborough University
T: +447462665904<tel:%2B447462665904>
E: E.Mantesi at lboro.ac.uk<mailto:E.Mantesi at lboro.ac.uk>

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151126/3c8ea54c/attachment-0003.htm>