[TRNSYS-users] How to record the computer clock time in TRNSYS?

[mcdowell at tess-inc.com]

Sunliang Cao - 

If you turn Debug Mode on for your project (in the control cards in
Simulation Studio), the lst file will include computer clock time
statistics for the simulation and the individual components in the
simulation. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2015-11-25 03:33, SUNLIANG CAO wrote: 

> Dear all,
> 
> Does anyone know how to record the computer clock time in TRNSYS?
> 
> I checked the type 21 (time values), but it seems that it can only output the "simulation time" rather than the "computer clock time".
> 
> Is there any advice on it?
> 
> Kind Regards,
> Sunliang Cao, Dr.,
> Department of Energy Technology,
> Aalto University,
> Finland 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151125/a1ae9a0f/attachment-0003.htm>