[TRNSYS-users] PVT (Type 560), input no. 14

[David BRADLEY]

Sanjeev,
  My apologies for the second email. I should have mentioned that while 
the displayed units are incorrect in the Type560 proforma, you can set 
either a constant value for the input or you can connect the output of 
another Type to this input and the results of your simulation will be 
correct so long as the value is specified in kJ/h.m2.K.
kind regards,
  David


On 11/22/2015 02:09, SANJEEV JAKHAR wrote:
> Dear Trnsys users,
> I am using PVT (Type 560) system for my simulation. I am stuck in the 
> input no. 14 (fluid heat transfer coefficient) which appears to be 
> dimensionless but actually  it is in W m2/K. How come it is 
> dimensionless quantity. Also by changing its value it is not effecting 
> the results in any way. Please help me for the concern problem.
>
> Thanks & Regards,
>
> **
> ***Sanjeev Jakhar*
> Research Scholar
> *Center for Renewable Energy and Environment Development (CREED)
> Mechanical Engineering Department
> *
> *Birla Institute of Technology & Science, Pilani**
> Rajasthan - 333031*
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151123/9ca35cf7/attachment-0003.htm>