[TRNSYS-users] Ventilation

mcdowell at tess-inc.com mcdowell at tess-inc.com
Tue Nov 10 13:07:51 PST 2015


 

Safwan Kanan - 

The ventilation air properties should be the same as would occur in the
actual system being modeled. The supply air flow rate is the amount of
air entering the zone - whether it is all outside air or all return air
or a mix depends on the design of the system. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2015-11-08 15:38, Safwan Kanan wrote: 

> Dear All, 
> 
> After defining AIR FLOW, TEMPERATURE and HUMIDITY as an INPUTS. 
> Any ideas for calculate Building Ventilation when the building connect with mechanical air conditioning system 
> (external cooling equipment)? 
> I think the AIR FLOW will be supply air to building. 
> 
> Supply air flow =Total air flow = Ventilation air flow +Return air flow from building 
> 
> I look forward to hearing from you soon. 
> 
> Regards, 
> 
> Safwan Kanan 
> PhD student 
> University of Manchester 
> Manchester 
> M13 9PL 
> UK 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151110/436f5c87/attachment-0003.htm>


More information about the TRNSYS-users mailing list