[TRNSYS-users] How to install COMIS Multizone Air Flow Model

[Tung Nguyen Huy]

Dear TRNSYS user,

I am sorry if my question is of our topic about TRNSYS, but I have tried
many ways without success.
I am using TRNSYS v.17 to simulate the residential building.

Now I want to install COMIS to simulate the Air flow inside that building.
However I have tried to download the COMIS installation from these links:

SourceForge.net
top page
http://sourceforge.net/projects/comis3/

installer
http://sourceforge.net/projects/comis3/files/COMIS3/COMIS3.2.1/

TRNSYS module
TRNSYS/Type157
http://sourceforge.net/projects/comis3/files/COMIS3/COMIS3.2.1/Binary/Trnsys/

However, when I installed them. There was no COMIS studio (program) appears
on my computer. I don't know what I did was correct or not. If it is wrong,
how could I install the COMIS.

Thank you very much in advance.

-- 
Nguyen Huy TUNG

-----------------------------
Lecturer in Civil Engineering Department
Construction Technical College number 1
Trung Van, Tu Liem, Ha Noi, Vietnam
Mobile:
Website: http://ctc1.edu.vn/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151102/c4558de6/attachment-0003.htm>