[TRNSYS-users] modeling building-type 56

[mcdowell at tess-inc.com]

Fereshteh Aramoun - 

To calculate the heating and cooling load for a zone you need to add a
heating type and a cooling type to your zone. 

A zone located in a basement would usually have boundary walls to some
external temperature rather than external walls. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2015-11-24 23:05, Fereshteh Aramoun wrote: 

> Hello TRNSYS Users 
> 
> I am modeling a multi-zone educational building type 56. My goal is to calculate the peak of heating and cooling loads during a year and to model thermal wastes of walls, windows,.. in the peak of heating and cooling load separately, can anyone help me, please? 
> 
> Moreover, can anyone know how it is possible to distinguish a zone which is located in the basement? 
> 
> Thank you so much 
> Kind Regards, 
> Fereshteh Aramoun 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151125/96f89dc7/attachment.htm>