[TRNSYS-users] Fw: GHP system

[mcdowell at tess-inc.com]

Mohammad - 

No one is going to be able to tell what is going on in your system by
just looking at a picture of your simulation. I would suggest that you
look at the documentation for Type557 and learn what the various
parameters mean and likely that will give you the understanding you need
to analyze your output. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2015-11-24 15:40, MOHAMMAD MATARNEH wrote: 

> On Friday, November 20, 2015 11:06 PM, MOHAMMAD MATARNEH <mmatarneh at yahoo.com> wrote:
> 
> Dear all; 
> 
> i would like to know why when i run the design in the attachment , i got very low heat transfer rate out. how can i increase it. and which parameter in GHX affect heat transfer rate? 
> 
> if anybody have model for such system ,please send it to me. 
> 
> thank you in advance. 
> 
> best regards. 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151125/50f8f4d0/attachment.htm>