[TRNSYS-users] [TRNSYS] Use/simulation of radiator in TRNSYS

[Peter Bennewitz]

Thanks! 

It seems as though type 361, 362 and 363 cost 110 Euros to use, am I right in this ? Im not sure I can afford to pay 110 Euros so I might have to think of another solution.

Has anyone got the radiator typ 1231 to work?

I actually have a couple of more questions. Would be very thankful if anyone would know the anwser to them.

1: I want to make my TRNSYS project larger so I can fit in more components, I went into File->Settings->Project and changed the height and width under "Project size" but nothing happend, how do you do to increase the size of your project?

2: I was modelling a multizone house in TRNBUILD I managed to save it without problem but when I want to open the project again I get an error message saying that the direction of a wall is undefined and the project will not open. This has happend to me once before and then I just redid the house, but now Im thinking that there must be a way to open/fix this without having to redo everything. It's quite difficult not to get one direction or wall undefined when you model a whole house I don't understand why TRNBUILD will not just let you into your project again so you can fix whatever is undefined. Does anyone know how to solve this?

Many thanks beforehand.

Best regards 

Peter 

From: heimrath at tugraz.at
To: trnsys-users at lists.onebuilding.org
Date: Mon, 2 Nov 2015 06:47:37 +0000
Subject: Re: [TRNSYS-users] [TRNSYS] Use/simulation of radiator in TRNSYS









Dear Peter,
 
die Types 361 und 362 are non-standard types from Transsolar
 
http://trnsys.de/docs/komponenten/komponenten_ts_de.htm
 
with sunny regards
Richard
 
 


Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org]
Im Auftrag von Peter Bennewitz

Gesendet: Montag, 02. November 2015 07:35

An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>

Betreff: Re: [TRNSYS-users] [TRNSYS] Use/simulation of radiator in TRNSYS


 



Hi Juan! 



Thank you for the anwser. 



Are TYPE 361 and TYPE 362 radiators ?



I can't seem to find TYPE 361 and TYPE 362, are they part of the TRNSYS/TESS library and if so, under which directory are they?


If they are not part of TRNSYS/TESS library then where can you get them?



Best regards 



Peter




From:
JuanF.Belmonte at uclm.es

To: trnsys-users at lists.onebuilding.org

Date: Thu, 29 Oct 2015 10:18:15 +0000

Subject: Re: [TRNSYS-users] [TRNSYS] Use/simulation of radiator in TRNSYS

Hello Peter.
 
As another option, you may use the nonstandard Types from Transsolar, TYPE 361 and TYPE362, which include static (steady state) and dynamic (considering the
 heat capacity of the radiator) models.
 
Regards.
 
 


De: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org]
En nombre de Peter Bennewitz

Enviado el: jueves, 29 de octubre de 2015 08:07 a.m.

Para: trnsys-users at lists.onebuilding.org

Asunto: [TRNSYS-users] [TRNSYS] Use/simulation of radiator in TRNSYS


 

Hi !




I am simulating the heating of a house with the help of a solar thermal system in TRNSYS. Previously I used a radiator Type1231 for heating the house, the problem is that I discovered that the water flowing out from the radiator had a temperature lower than
 that of the ambient temperature of the house, and sometimes would drop as low as below freezing.




This would meen that the radiator is extracting energy from the water rather than just letting the hot water radiating heat, and thus not simulating a real radiator in an accurate way.



Now I am using the heat exchanger Type5c instead and trying to let it work as a radiator by letting the influid have the specific heat 4.19 kJ/kg*K (water) and the outfluid 1 kJ/kg*K (air). This seems to work reasonably well the problem is that it is hard to
 know how large the flowrate should be on the load side to simulate a real radiator in an accurate way.




I have been thinking about maybe using an equation instead, but the same problems with uncertainty regarding how large the flowrate on the load side should be would occur there.




Does anyone know if there is a way to let the radiator Type1231 work properly, or does anyone have any other ide of how to simulate an ordinary radiator with water inflow radiating heat (heating) the air around it?




Best regards 



Peter Bennewitz



Lund University 




_______________________________________________ TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org






_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151102/449a644c/attachment.htm>