[TRNSYS-users] Parametric analysis error

[David BRADLEY]

Meer,
   This was an bug in TRNEdit that was fixed in the september 2014 
release (v17.02.0004). Please check your trnsys.ini file 
(..\Trnsys17\trnsys.ini) by opening it with a text editor and if you 
have an earlier version, please contact your distributor for the update.
kind regards,
  David


On 5/18/2015 1:18 PM, A. M wrote:
> Dear all,
>
> im doing parametric study for the area of the collector. I defined the 
> area of the collector in equation component and set Area collector as 
> string. and then i connected the area from the equation to "Totals" 
> printer.
>
> After that, i opened TRNedit to conduct my parametric study. I changed 
> the area of collector to be a constant.
>
> However, when i run the simulation it gives me that file doesnt exist.
>
> Did i miss any step ?
>
> Thanks !
>
> Meer
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150519/7026f8ea/attachment-0002.htm>