[TRNSYS-users] TYPE907

[Jeff Thornton]

I don't have the proforma in from of me but do you have flow through all the required inlets (cooling water, etc) and any on/off control signals set on?  If you're convinced you do, it would help to send the project along.

Jeff Thornton
TESS

Sent from my iPhone

> On May 16, 2015, at 12:17 PM, Johannes Kirch <JohannesKirch at gmx.de> wrote:
> 
> Hey there everybody,
>  
> I am trying to build a energy hybrid system for my dissertation in TRNSYS. There are a photovoltaics system and a cogeneration system linked with a battery storage. The photovoltaics system is working. For the CHP I am using TYPE 907 and some heat exchangers and thermal storage tank for the heating part. But the IC Engine is not working. I tried some real electrical load profiles and linked them in TYPE 9c with the engine as "desired output power". But there is still no power to see in the output and no increase of the temperatures of the coolants. So how can I get this engine working?
> I am not sure where are my mistakes. Is there an example availible to get a better comprehension of TYPE 907 in combination as CHP?
>  
> Kind regards,
> Johannes Kirch
>  
>  
>  
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150516/c384e03d/attachment-0002.htm>