[TRNSYS-users] evauated tube thermosyphon with storage
David BRADLEY
d.bradley at tess-inc.com
Tue May 26 12:33:30 PDT 2015
Nidal,
Is your collector an evacuated tube device in which water from the
tank circulates through the tubes or is it a heat pipe collector in
which a refrigerant in the evauated tubes boils in the tube and
condenses in the tank but does not come into contact with the tank
water? To my knowledge there aren't any proven models of either but we
have been working with a natural convection loop model that may be used
to estimate the performance of such collectors.
kind regards,
David
On 5/24/2015 3:19 AM, Nidal Abdalla wrote:
> Dear all
>
> How can I simulate thermosyphon collector with Integral Collector
> Storage using evcuated tube collector.
> I found that type 45 is used only with FPC.
> Regards
>
> Nidal
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150526/4dff70cc/attachment.htm>
More information about the TRNSYS-users
mailing list