[TRNSYS-users] Heat exchanger UA value

[David BRADLEY]

Martin,
   I would highly recommend that if at all possible you use Type534 from 
the TESS Storage Tank library in place of Type60. Type534 has an 
internal heat exchanger model that is far more robust than the one built 
in to Type60.
Kind regards,
  David


On 3/27/2015 3:11 PM, Martin Berov wrote:
> Dear TRNSYS users,
>
> I'm trying to analyse the influence of the heat exchanger  area on the 
> solar fraction and collector efficiency.
>
> I'm using storage tank Type 60c  with internal HX. Although I change 
> the area and the length(keeping the outside diameter constant) I 
> always get same results for the monthly solar fraction and efficiency 
> - like there is no influence.
>
> What could be the reason for this?
>
> Best regards
> Martin
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150327/07173267/attachment-0003.htm>