[TRNSYS-users] Help in a themostat with 2 monitering temperature ( 2 temperatures to watch)

Shahen Fakhraldin shahinrkl_7 at yahoo.com
Mon Mar 23 04:34:28 PDT 2015


Hi all,
I am looking for a controller that depends on two monitoring temperatures (and each monitoring temp has its own set temp), and this controller works according to the conditions below:
1- if the monitoring temp 1 is below a set temp 1 ===> system Off
2- if the monitoring temp 2 is higher that a set temp 2===> system On
To explain more, the system is turned Off when the first monitoring temp is below (or equal) the first set temp, and the system stays in Off condition until the 2nd monitoring temperature is higher (or equal) the 2nd setting temp where the system is turned On and continuous to be On till the 1st mentoring temperature is equal or below the 1st setting temp and so on.Is there a component in TRNSYS can do that ?Any kind of help would be most appreciated.
King regards,Shahen Fakhraldin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150323/956bfe2e/attachment-0002.htm>


More information about the TRNSYS-users mailing list