[TRNSYS-users] Problème

[Gérôme Babic]

Hi, 
Thanks you it's working :)

From: hotline at Transsolar.com
To: trnsys-users at lists.onebuilding.org
Date: Tue, 17 Mar 2015 13:46:04 +0000
Subject: Re: [TRNSYS-users] Problème









Hi,
 
In the online Plotter the label names aren’t allowed to have blancs :
 
* Model "T sol" (Type 65)
*

 
UNIT 23 TYPE 65               T sol
*$UNIT_NAME T sol
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 1159 639
*$LAYER Main #

PARAMETERS 12
6                             ! 1 Nb. of left-axis variables
0                             ! 2 Nb. of right-axis variables
0                             ! 3 Left axis minimum
25                           ! 4 Left axis maximum
0                             ! 5 Right axis minimum
10000                    ! 6 Right axis maximum
1                             ! 7 Number of plots per simulation
12                           ! 8 X-axis gridpoints
0                             ! 9 Shut off Online w/o removing
-1                           ! 10 Logical unit for output file
0                             ! 11 Output file units
0                             ! 12 Output file delimiter
INPUTS 6
21,1                       ! Temp_sol 1.03m:Soil Temperature at Node  ->Left axis variable-1
19,1                       ! Temp_sol 1.45m:Soil Temperature at Node  ->Left axis variable-2
22,1                       ! Temp_sol 1.45mur verticale:Soil Temperature at Node  ->Left axis variable-3
0,0                         ! [unconnected] Left axis variable-4
0,0                         ! [unconnected] Left axis variable-5
0,0                         ! [unconnected] Left axis variable-6
*** INITIAL INPUT VALUES
T sol  1.03 V T sol 1.45 h T sol 1.45 V T sol 0 
 SCHED_OCCUPATION
SCHED_INCCO_MATIN

LABELS  3
"Temperatures  [deg C]"
"Temperatures  [deg C]"
"T sol"
 
Instead of “
T sol  1.03 V”
you can write “T_sol_ 1.03_V”
 
Marion
 


Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org]
Im Auftrag von Gérôme Babic

Gesendet: Dienstag, 17. März 2015 11:17

An: trnsys-users at lists.onebuilding.org

Betreff: [TRNSYS-users] Problème


 

Bonjour,

 


J'utilise Trnsys depuis peu et je suis en train de simuler la surchauffe dans une maison.J'ai seulement fait une pièce et je suis en train de regarder à la régulation mais après
 eu des erreurs de convergence j'ai une erreur plus importante dans mon programme mais je comprend pas ce qu'il faut faire car en modifiant parfois certaines valeurs elle part puis elle revient. Je préfère tout changer au début que tout à la fin.Pouvez-vous
 me conseiller ?Car même en supprimant le paramètre concerner, il me met que j'ai la même erreur


 


Hi,


 


I use Trnsys lately and I am simulating superheating in a home. I only made a room and I am looking 
inregulation but after had of errors of convergence I have a more important error in my programme but 
 i don't know what to do because sometimes by changing some values
 the programme running. I prefer changing everything at the beginning wheneverything at the end. Can you help me? Because even by abolishing parametre to

concern, he puts me that I have the same error





The TRNSYS processor has reported that an unrecognized control card was found trying to read the input file.This error can be caused by underspecifying a required number of items
 in the input file. For example, specifying only 9 parameters after a "PARAMETERS 10" card has been read can this error. The line that caused this error is listed in the reported information below


 


Reported information : SCHED_INCCO_MATIN







_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150317/e439397a/attachment-0003.htm>