[TRNSYS-users] Help

[David BRADLEY]

Avishek,
  TRNSYS does not contain models of the component parts of an absorption 
chiller. Its model of an absorption chiller is a performance map that 
gives COP and capacity as a function of the current inlet conditions of 
the chilled water, cooling water, and hot water streams. The TESS HVAC 
and CoGen libraries contain similar performance map models for single 
and double effect steam and direct fired machines. In order to make a 
model of an absorption chiller from first principals, you would have to 
write models of those component pieces yourself using a Fortran compiler 
based on the information available in the 07-Programmer's Guide manual
Regards,
  David


On 3/12/2015 05:09, avishek ray wrote:
> Hi,
>
> i want to model the individual system components like generator, 
> absorber etc with TRNSYS based on the first principle model ie by use 
> of mass and energy balance equations. I want to determine the 
> specification of the individual components. Pl guide me how it can be 
> possible to design it. i am urgently requiring it
>
>
>
>
> Regards
> Avishek Ray
>
> Research Fellow and Teaching Assistant
> Department of Energy Management
> Indian Institute Of Social Welfare and Business Management; Kolkata-700073
>
> M:9038707191
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150312/296bf425/attachment-0003.htm>